We are extending the metal sale for two more weeks. You can still get 29 gauge for as low as $.68 per square foot or a 26 gauge Standing Seam metal for as low as $1.37 per square foot. Both of these products come with great warranties and are produced by ASC Building Products, a leader in metal roofing and siding for the Pacific Northwest. Give us a call, send us an email or stop in for a quote on your project.
Showing posts with label standing seam. Show all posts
Showing posts with label standing seam. Show all posts
New Roof - New Soffits!
Friday
.JPG)
The Maurer's are getting a new Smokey Blue Standing Seam Roof and Charcoal Gray Aluminum Soffits today. Thinking about a new metal roof, new metal soffits will really finish off the project. We can provide you with the materials and know-how to do it yourself, or we can supply and install the whole project.
RON AND DON SPECIAL!
Tuesday
For the month of October we are offering the lowest materials price possible for 16" wide Skyline by ASC. Skyline has proven to be an outstanding residential standing seam product for our area and we have set the price lower than it was in 2005 due to special pricing from the manufacturer! We are calling it the "Ron and Don Special" (you may have heard about us on KIRO 97.3 radio during the Ron and Don Show) and it will effect materials sales as well as installation packages.
If you were quoted an installation package recently, please give us the chance to re-quote your project with our new lower price.
If you are looking for materials or a complete materials package, "Our price can't be beat and we will not be undersold!" says owner Jerry Iselin. As with any price comparison, we will need to see written quotes and this offer is on all orders placed between October 11, 2010 and October 31, 2010, previously placed orders do not apply.
With this new lower pricing and the up to $1500 tax credit which expires 12/31/2010, this really is going to be the lowest price through the end of the year and most likely throughout 2011. Give us a call or email us at jerry@metalroofspecialties.com and we will prove our price simply can't be beat and we will not be under sold!
If you were quoted an installation package recently, please give us the chance to re-quote your project with our new lower price.
If you are looking for materials or a complete materials package, "Our price can't be beat and we will not be undersold!" says owner Jerry Iselin. As with any price comparison, we will need to see written quotes and this offer is on all orders placed between October 11, 2010 and October 31, 2010, previously placed orders do not apply.
With this new lower pricing and the up to $1500 tax credit which expires 12/31/2010, this really is going to be the lowest price through the end of the year and most likely throughout 2011. Give us a call or email us at jerry@metalroofspecialties.com and we will prove our price simply can't be beat and we will not be under sold!
Standing Seam Roofing
Standing Seam is a common term used to describe many manufacturers panels. In most cases, standing seam refers to panels that are full length from the ridge to the eave, usually between 12" and 18" wide, with a high rib (about 1" to 2") on each side and either a flat surface or some minor ribs in the middle. The panels will either have a flange on one side for screwing directly to a substrate, or they will have clips which are installed onto the substrate then the panels snap into the clips. Standing seam panels are very popular in the Pacific Northwest. One major benefit is the screws are hidden, which is aesthetically pleasing and helps eliminate debris buildup such as pine needles. Manufacturers in this area produce a variety of standing seam panels and we are here to help you pick the best panel for your project.
Subscribe to:
Posts (Atom)
